COATINGS

EUCO TEXTURE SHIELD
EUCO TEXTURE SHIELD is a cementitious floor coating designed to protect, beautify and enhance concrete balconies, decks, walkways and any interior or exterior concrete surface.

EUCOPOXY TUFCOAT DBS
EUCOPOXY TUFCOAT DBS provides an attractive seamless floor that is chemical and abrasion resistant. Utilizing a 100% solids epoxy and colored quartz aggregate, EUCOPOXY TUFCOAT DBS can be applied to provide positive footing or a smooth, high gloss appearance.

EUCOPOXY TUFCOAT HB+
EUCOPOXY TUFCOAT HB+ is a two-component epoxy polyamine coating which is a 100% solids system. EUCOPOXY TUFCOAT HB+ is a high-build, wear resistant, impact resistant coating that provides protection against chemical attack.

EUCOPOXY TUFCOAT VOX
EUCOPOXY TUFCOAT VOX is a two-component, water-based, low-odor, epoxy-polyamide coating. It acts as a tough, abrasion-resistant membrane that withstands wear and chemical attack in a variety of applications. EUCOPOXY TUFCOAT VOX should be used in many areas where a solvent-based product is not permitted.

EUCOPOXY TUFCOAT VOX
EUCOSEAL is a heavy duty cementitious coating intended to waterproof and protect masonry. It is mixed with latex or water and applied to the surface of masonry or concrete walls.

EUCOTHANE & EUCOTHANE VOX
EUCOTHANE is a two-component catalyzed aliphatic polyester-polyurethane floor coating with outstanding resistance to abrasion and chemical attack. This premium coating has excellent flexibility, ultra-violet color stability and weathering characteristics.

FLO-TOP
FLO-TOP is a free flowing, self-leveling, compound specially designed for easy application over concrete floors as an underlayment for subsequent placement of floor coverings. It is suitable for use as a repair and leveling course and my be applied at thicknesses from featheredge to 1" (25 mm).

KUREZ DR VOX
KUREZ DR VOX is a reduced odor, liquid membrane forming curing compound formulated from hydrocarbon resins. The membrane coating provides an excellent initial cure for concrete, then begins to chemically break down after approximately 4 weeks.

KUREZ VOX WHITE PIGMENTED
KUREZ VOX WHITE PIGMENTED is a water based liquid membrane forming curing compound for new concrete requiring a reflective curing membrane. The membrane allows the concrete to retain sufficient water in order to achieve the designed strength while providing reflectivity to minimize heat build-up in direct sun.

KUREZ W VOX
KUREZ W VOX is a low odor, water based liquid membrane forming curing compound for new concrete. The membrane allows the concrete to retain sufficient moisture in order to achieve the designed strength, and exceeds ASTM specifications.

REZ-SEAL
REZ-SEAL is an acrylic copolymer that cures concrete and provides a protective coating for interior and exterior concrete including terrazzo surfaces. It bonds tenaciously to concrete forming an inert, impervious film that is resistant to the alkali from fresh cement, salts and many construction stains.

SUPER FLOW-TOP
SUPER FLOW-TOP is a free flowing, self-leveling compound specially designed for easy application over concrete floors as an underlayment for subsequent placement of floor coverings. It is suitable for use as a repair and leveling course and may be applied at thicknesses from featheredge to 1" (25 mm). SUPER FLO-TOP is a one part system requiring only the addition of water for mixing.

SUPER REZ-SEAL
SUPER REZ-SEAL is a high solids acrylic copolymer that cures concrete and provides a protective membrane for interior and exterior concrete including terrazzo surfaces. It bonds tenaciously to concrete forming an inert film that is resistant to the alkali from fresh cement, salts and many construction stains.

SUPER WALL-PRO
SUPER WALL-PRO is a fiber reinforced, elastomeric emulsion based coating which waterproofs, protects and beautifies a variety of wall surfaces and other building materials. This product is a non-toxic, non-fading coating that produces a high build film which is tough, yet extremely flexible.

EPOXY PRODUCTS

CORR-BOND
CORR-BOND is a 3 part bonding agent composed of a specialty water based epoxy and selected cementitious components.

E3-F
E3-F high flow epoxy grout is the performance standard for flowable epoxy grouts.

E3-HP
E3-HP high performance epoxy grout is a performance standard for epoxy grouts. E3-HP is formulated from a new resin technology. Further, a proprietary aggregate blend has created a grout which exceeds all current performance standards.

EPOXY GROUT SYSTEM FOR EQUIPMENT BASES
E3-G is a high strength epoxy grout designed for grouting of machine and equipment bases of all types. Formulated to be used in both thin and thick sections, E3-G is suitable for grouting bases of numerous configurations. This formula gives excellent strengths and resistance to many corrosive chemicals.

EUCO #352 EPOXY SYSTEM
EUCO #352 EPOXY SYSTEM is a 100% reactive, 2-component material designed as a moisture insensitive adhesive and binder for numerous application needs. This low modulus material is available in a low viscosity (LV), medium miscosity (MV) or GEL consistency.

EUCO #452 EPOXY SYSTEM
EUCO #452 EPOXY SYSTEM is a 100% reactive, 2-component material designed as a moisture insensitive adhesive and binder for numerous application needs. This high modulus material is available in a low viscosity (LV), medium viscosity (MV) or GEL consistency.

EUCO #452-P EPOXY SYSTEM
EUCO #452-P EPOXY SYSTEM is a 100% reactive, two component material specifically designed as a prison security sealant. It is moisture insensitive, high modulus epoxy gel that can be applied on vertical, horizontal and overhead concrete member joints.

EUCO #456 MORTAR
EUCO #456 MORTAR is a trowel applied epoxy mortar system designed to surface and resurface floor slabs of all types. Worn and damaged floors can be restored to a uniform, high strength, wear resistant surface with the use of EUCO #456 MORTAR.

EUCO #456S MORTAR
EUCO #456S MORTAR is an epoxy repair material for use where exceptional strength and toughness are needed. It consists of a two component epoxy resin system and a specially processed graded iron aggregate.

EUCO #512 VOX EPOXY SEALER
EUCO #512 VOX EPOXY SEALER is a two-component epoxy system designed to penetrate concrete surfaces. It fills surface pores resulting in improved wear resistance and lower absorption of water and salts.

EUCO # 620 EPOXY SYSTEM
EUCO # 620 EPOXY SYSTEM is a 100% reactive, 2-component material designed as a moisture insensitive adhesive and binder for numerous application needs. This high modulus material is available in a low viscosity (LV), medium viscosity (MV) or GEL consistency.

EUCO 700
EUCO 700 is a two component, semi-rigid epoxy for filling control and construction joints in industrial concrete floors. This product supports the joint edges and reduces spalling of the edges caused by wheel traffic.

EUCO 800
EUCO 800 is a two component, 100% solids semi-rigid epoxy for filling contraction (control) and construction joints in industrial concrete floors. This product is designed with greater elongation properties, which may reduce the expected separation between joint filler and concrete when the joint filler is installed with significant concrete shrinkage still to occur.

EUCOPOXY TUFCOAT
EUCOPOXY TUFCOAT is a high-performance floor-coating system designed to provide concrete surfaces with excellent wear resistance in combination with protection against chemical attack. These outstanding properties are further enhanced by the availability of a wide selection of semi-gloss colors for superior aesthetic benefits.

EUCOPOXY TUFCOAT DBS TROWEL OVERLAY MORTAR
EUCOPOXY TUFCOAT DBS TROWEL OVERLAY MORTAR is a trowel applied epoxy mortar system designed to resurface floor slabs of all types. Worn and damaged floors can be restored to a uniform, high strength, wear resistant surface with the use of EUCOPOXY TUFCOAT DBS TROWEL OVERLAY MORTAR.

GROUTS

CONCRETE COAT
CONCRETE COAT is a polymer modified cementitious mortar designed for use as a concrete repair mortar at thicknesses of 1/2" -2" (13 mm -50 mm). It is formulated to incorporate liquid latex technology, which provides excellent durability under freeze/thaw cycling as well as reducing ingress by water and deicing salts.

CONCRETE-TOP SUPREME
CONCRETE-TOP SUPREME is a latex and microsilica modified cementitious mortar designed for use as a concrete repair mortar at thicknesses of 3/8"-2" (10 mm-50 mm). This product is a one part formula which incorporates powder latex technology.

DRY PACK GROUT
DRY PACK GROUT is a natural aggregate, high strength, non-shrink material designed specifically for mixing and placing at a damp pack consistency. When mixed with a minimum of water, it can be placed into voids and spaces where forming or containment of self-leveling grouts is not possible or desirable.

E3-F
E3-F high flow epoxy grout is the preformance standard for flowable epoxy grouts. A special resin and hardener formulation plus a proprietary aggregate filler allows E3-F to travel through a standard grout box in less than a minute.

EPOXY GROUT SYSTEMS FOR EQUIPMENT BASES
E3-F high flow epoxy grout is the preformance standard for flowable epoxy grouts. A special resin and hardener formulation plus a proprietary aggregate filler allows E3-F to travel through a standard grout box in less than a minute. Designed with excellent engineering properties, this product provides high bearing and ease of placeability.

EUCO CABLE GROUT
EUCO CABLE GROUT is designed to produce a pumpable, non-shrink, high strength grout. It provides corrosion protection for steel cable, anchorages and rods. EUCO CABLE GROUT is extremely flowable, and cured grout is similar in appearance to concrete.

EUCO CABLE GROUT PTX
EUCO CABLE GROUT PTX is designed to produce a pumpable, non-shrink, high strength grout. It provides corrosion protection for steel cables, anchorages and rods.

EUCO PRE-CAST GROUT
EUCO PRE-CAST GROUT is designed for critical use where high strength, non-staining characteristics and positive expansion are required. It contains only natural aggregate and an expansive cementitious binder.

EUCO RAPID PATCH & RAPID PATCH VF
EUCO RAPID PATCH is a rapid setting, rapid hardening cementitious material for patching and repair of concrete surfaces. Requiring only the addition of water, EUCO RAPID PATCH is easy to use and can be shaved to conform to the area of placement after initial set.

EUCO RAPID PATCH HE
EUCO RAPID PATCH HE is a rapid setting, polymer modified cementitious material for precast, patching and repair of concrete surfaces, and areas requiring rapid set with rapid strength. EUCO RAPID PATCH HE can be used in horizontal, vertical or overhead applications. This product is designed to be placed at 1/16th (2mm) to 1" (25mm) in depth.

EUCO ROCK
EUCO ROCK is a pourable, fast setting hydraulic cement designed for anchoring or grouting applications. EUCO ROCK sets in less than 10 minutes and rapidly achieves load bearing and bond strength properties.

EUCO TREMIE GROUT
EUCO TREMIE GROUT is specially designed for use in underwater grouting applications. This highly flowable, cement based, non-shrink grout remains in a cohesive, well blended mix when placed or pumped in off-shore concrete repairs.

EUCO-SPEED
EUCO-SPEED is a rapid setting, rapid hardening cementitious material for patching and repair of concrete surfaces. Requiring only the addition of water, EUCO-SPEED is easy to use and can be installed with standard tools, equipment and procedures.

EUCO-SPEED MP
EUCO-SPEED MP is a rapid setting, very rapid hardening magnesium phosphate material for patching and repair of concrete and masonry surfaces. EUCO-SPEED MP requires only the addition of water and can be installed with standard tools, equipment and procedures.

EUCOCRETE
EUCOCRETE is a versatile, one part, microsilica modified, patching and repair compound for repair projects of all types. Requiring only the addition of water, EUCOCRETE is a high strength material which is easy to use with an extended working time for ease of placement.

EUCOPATCH
EUCOPATCH is a one part, fast setting, patching and repair material for use on new and existing concrete and masonry surfaces. This product is designed for patching or reconstruction of damaged concrete or masonry; interior or exterior.

EUCOSHOT
EUCOSHOT is a microsilica modified, one component, concrete repair material. This cement based, modified mortar is designed for use on vertical and overhead surfaces by dry shotcrete (gunite) application.

FLEX-CON
FLEX-CON is a water dispersion of an architectural grade acrylic latex specifically designed for modifying portland cement compositions. Mortar modified with FLEX-CON has improved physical strength, and superior adhesion to old concrete, masonry, brick, and many other surfaces.

HI-FLOW GROUT
HI-FLOW GROUT is specially designed for use where high tolerance, high strength and high fluidity are required. It is formulated as a natural aggregate system with a shrinkage-compensating binder and is highly flowable without sacrificing strength or performance capabilities.

HI-FLOW METALLIC GROUT
HI-FLOW METALLIC GROUT is specially designed for use where high tolerance, high strength and high fluidity are required. It is formulated as a metallic aggregate system with a shrinkage-compensating binder.

NS METALLIC GROUT
NS METALLIC GROUT is a factory-blended, non-shrink grout for use in critical applications. It incorporates the latest technological advances in shrinkage prevention and internal reinforcement. It is virtually non-staining and, therefore, useful in many aesthetic applications.

POLY-PATCH
POLY-PATCH is a normal setting cement based patching and resurfacing compound ready to use with the addition of only water. POLY-PATCH may be used on either vertical or horizontal surfaces, as thin as 1/16" (2 mm).

SBR LATEX
SBR LATEX is a carboxylated styrene butadiene copolymer latex admixture that is designed as an integral adhesive for cement bond coats, mortars and concrete to improve bond strength and chemical resistance.

THIN COAT
THIN COAT is a latex modified cementitious product designed for use as a concrete repair mortar at thicknesses of up to 1/2" (13 mm). It is formulated to incorporate liquid latex technology, which provides excellent durability under freeze/thaw cycling as well as protection against ingress by water and deicing salts.

THIN-TOP SUPREME
THIN-TOP SUPREME is a latex and microsilica modified cementitious mortar designed for use as a floor or deck topping at thicknesses of 1/16" to 3/8" (1.6 mm to 10 mm). This product is a one part formula which incorporates powder latex technology.

VERTICOAT
VERTICOAT is a polymer modified cementitious mortar for vertical and overhead concrete and masonry repairs. It sets rapidly to allow quick, easy repairs of concrete surfaces both inside and outside. VERTICOAT is a two component mortar designed for trowel applied repairs.

VERTICOAT SUPREME
VERTICOAT SUPREME is a one component, microsilica and latex modified, non-sag repair mortar. This cement based product is designed for trowel applied vertical and overhead repairs requiring high performance.

SEALERS

AQUA-CURE VOX
AQUA-CURE VOX is a water based, low odor membrane forming liquid for curing, sealing, dustproofing and hardening concrete. AQUA-CURE VOX is suitable for use over new and old concrete and performs well on both interior and exterior concrete.

DIAMOND CLEAR VOX
DIAMOND CLEAR VOX is an acrylic, emulsion blend curing and sealing compound for freshly placed concrete. This product provides a quality cure and seal while assuring total resistance to yellowing from ultraviolet exposure.

EUCO DIAMOND HARD
EUCO DIAMOND HARD sealer is a proprietary blend of siliconate polymers which penetrate concrete surfaces providing an increase in abrasion resistance and a reduction in the surface absorption of liquids. The product reacts with elements in the concrete surface to impart a low sheen which enhances the appearance of the concrete surface.

EUCO-GUARD 100
EUCO-GUARD 100 is a deep penetrating liquid designed to protect concrete structures, decks, pavements and surfaces against the adverse effects of deicing salts, moisture, weathering and freeze damage. EUCO-GUARD 100 reacts chemically with the concrete to provide a highly effective chloride screen and water barrier.

EUCO-GUARD S-40
EUCO-GUARD S-40 is a deep penetrating liquid designed to protect concrete structures, decks, pavements and surfaces against the adverse effects of deicing salts, moisture, weathering and freeze damage. EUCO-GUARD S-40 reacts chemically with the concrete surface to provide a highly effective chloride screen and water barrier.

EUCO-GUARD VOX
EUCO-GUARD VOX is a V.O.C. compliant deep penetrating liquid sealer designed to protect concrete surfaces, decks, pavements and surfaces against adverse effects of deicing salts, moisture, weathering and freeze damage. EUCO-GUARD VOX reacts chemically with the concrete to provide a highly effective chloride screen and water barrier.

EUCOCURE VOX
EUCOCURE VOX is a liquid, membrane forming curing and sealing compound for concrete. It protects new concrete and reduces crazing, spalling and flaking on the surface.

EUCOSIL
EUCOSIL is a sprayable sodium silicate based compound for surface application to harden, seal and dustproof concrete. It can be used on all new concrete surfaces whether fresh or already cured and can be used on older, dusting concrete surfaces.

LINSEED OIL TREATMENT
LINSEED OIL TREATMENT is a blend of boiled linseed oil and solvents. When applied in a thin coating to concrete surfaces, it protects them from winter damage due to freeze-thaw cycling and the effects of deicing salts.

SUPER AQUA-CURE VOX
SUPER AQUA-CURE VOX is a water based, low odor membrane forming liquid for curing, sealing, dustproofing, and hardening concrete. SUPER AQUA-CURE VOX is suitable for use over new and old concrete and performs well on both interior and exterior concrete.

SUPER DIAMOND CLEAR
SUPER DIAMOND CLEAR is a state-of-the-art curing and sealing compound specially designed to provide a quality cure and seal, while assuring total resistance to yellowing from ultraviolet exposure. This product is suitable for use on interior and exterior concrete surfaces.

SUPER DIAMOND CLEAR VOX
SUPER DIAMOND CLEAR VOX is a high solids acrylic, emulsion blend liquid membrane forming, curing and sealing compound for freshly placed concrete. This product provides a quality cure and seal while assuring total resistance to yellowing from ultraviolet exposure.

SUPER FLOOR COAT
SUPER FLOOR COAT is a high solids resin copolymer curing compound and sealer for concrete. It has been modified to make a harder film and provide better gloss retention than most curing and sealing compounds.

SUPER FLOOR COAT COLORED
SUPER FLOOR COAT COLORED is a resin, copolymer curing compound and sealer for concrete. It has been pigmented with non-fading colors and is intended for use with compatible colors of SURFLEX and EUCO-PLATE HD.

SURFHARD
SURFHARD is a magnesium silicofluoride that reacts chemically with the free lime and calcium salts in hardened concrete to make a more dense and durable surface. It will effectively penetrate a concrete surface and make it hard, free from dusting and highly resistant to corrosion and abrasion.

WEATHER-GUARD
WEATHER-GUARD is a siloxane based penetrating sealer designed specifically for the treatment of masonry materials and concrete surfaces. WEATHER-GUARD protects concrete and masonry surfaces from the effects of exterior exposure and weathering.