EPOXY PRODUCTS
CORR-BOND
CORR-BOND is a 3 part bonding agent composed of a specialty water based epoxy and selected cementitious components.
E3-F
E3-F high flow epoxy grout is the performance standard for flowable epoxy grouts.
E3-HP
E3-HP high performance epoxy grout is a performance standard for epoxy grouts. E3-HP is formulated from a new resin technology. Further, a proprietary aggregate blend has created a grout which exceeds all current performance standards.
EPOXY GROUT SYSTEM FOR EQUIPMENT BASES
E3-G is a high strength epoxy grout designed for grouting of machine and equipment bases of all types. Formulated to be used in both thin and thick sections, E3-G is suitable for grouting bases of numerous configurations. This formula gives excellent strengths and resistance to many corrosive chemicals.
EUCO #352 EPOXY SYSTEM
EUCO #352 EPOXY SYSTEM is a 100% reactive, 2-component material designed as a moisture insensitive adhesive and binder for numerous application needs. This low modulus material is available in a low viscosity (LV), medium miscosity (MV) or GEL consistency.
EUCO #452 EPOXY SYSTEM
EUCO #452 EPOXY SYSTEM is a 100% reactive, 2-component material designed as a moisture insensitive adhesive and binder for numerous application needs. This high modulus material is available in a low viscosity (LV), medium viscosity (MV) or GEL consistency.
EUCO #452-P EPOXY SYSTEM
EUCO #452-P EPOXY SYSTEM is a 100% reactive, two component material specifically designed as a prison security sealant. It is moisture insensitive, high modulus epoxy gel that can be applied on vertical, horizontal and overhead concrete member joints.
EUCO #456 MORTAR
EUCO #456 MORTAR is a trowel applied epoxy mortar system designed to surface and resurface floor slabs of all types. Worn and damaged floors can be restored to a uniform, high strength, wear resistant surface with the use of EUCO #456 MORTAR.
EUCO #456S MORTAR
EUCO #456S MORTAR is an epoxy repair material for use where exceptional strength and toughness are needed. It consists of a two component epoxy resin system and a specially processed graded iron aggregate.
EUCO #512 VOX EPOXY SEALER
EUCO #512 VOX EPOXY SEALER is a two-component epoxy system designed to penetrate concrete surfaces. It fills surface pores resulting in improved wear resistance and lower absorption of water and salts.
EUCO # 620 EPOXY SYSTEM
EUCO # 620 EPOXY SYSTEM is a 100% reactive, 2-component material designed as a moisture insensitive adhesive and binder for numerous application needs. This high modulus material is available in a low viscosity (LV), medium viscosity (MV) or GEL consistency.
EUCO 700
EUCO 700 is a two component, semi-rigid epoxy for filling control and construction joints in industrial concrete floors. This product supports the joint edges and reduces spalling of the edges caused by wheel traffic.
EUCO 800
EUCO 800 is a two component, 100% solids semi-rigid epoxy for filling contraction (control) and construction joints in industrial concrete floors. This product is designed with greater elongation properties, which may reduce the expected separation between joint filler and concrete when the joint filler is installed with significant concrete shrinkage still to occur.
EUCOPOXY TUFCOAT
EUCOPOXY TUFCOAT is a high-performance floor-coating system designed to provide concrete surfaces with excellent wear resistance in combination with protection against chemical attack. These outstanding properties are further enhanced by the availability of a wide selection of semi-gloss colors for superior aesthetic benefits.
EUCOPOXY TUFCOAT DBS
EUCOPOXY TUFCOAT DBS provides an attractive seamless floor that is chemical and abrasion resistant. Utilizing a 100% solids epoxy and colored quartz aggregate, EUCOPOXY TUFCOAT DBS can be applied to provide positive footing or a smooth, high gloss appearance.
EUCOPOXY TUFCOAT DBS TROWEL OVERLAY MORTAR
EUCOPOXY TUFCOAT DBS TROWEL OVERLAY MORTAR is a trowel applied epoxy mortar system designed to resurface floor slabs of all types. Worn and damaged floors can be restored to a uniform, high strength, wear resistant surface with the use of EUCOPOXY TUFCOAT DBS TROWEL OVERLAY MORTAR.
EUCOPOXY TUFCOAT HB+
EUCOPOXY TUFCOAT HB+ is a two-component epoxy polyamine coating which is a 100% solids system. EUCOPOXY TUFCOAT HB+ is a high-build, wear resistant, impact resistant coating that provides protection against chemical attack.
EUCOPOXY TUFCOAT VOX
EUCOPOXY TUFCOAT VOX is a two-component, water-based, low-odor, epoxy-polyamide coating. It acts as a tough, abrasion-resistant membrane that withstands wear and chemical attack in a variety of applications.