GROUTS

CONCRETE COAT
CONCRETE COAT is a polymer modified cementitious mortar designed for use as a concrete repair mortar at thicknesses of 1/2" -2" (13 mm -50 mm). It is formulated to incorporate liquid latex technology, which provides excellent durability under freeze/thaw cycling as well as reducing ingress by water and deicing salts.

CONCRETE-TOP SUPREME
CONCRETE-TOP SUPREME is a latex and microsilica modified cementitious mortar designed for use as a concrete repair mortar at thicknesses of 3/8"-2" (10 mm-50 mm). This product is a one part formula which incorporates powder latex technology.

DRY PACK GROUT
DRY PACK GROUT is a natural aggregate, high strength, non-shrink material designed specifically for mixing and placing at a damp pack consistency. When mixed with a minimum of water, it can be placed into voids and spaces where forming or containment of self-leveling grouts is not possible or desirable.

E3-F
E3-F high flow epoxy grout is the preformance standard for flowable epoxy grouts. A special resin and hardener formulation plus a proprietary aggregate filler allows E3-F to travel through a standard grout box in less than a minute.

E3-HP
E3-HP high performance epoxy grout is a performance standard for epoxy grouts. E3-HP is formulated from a new resin technology. Further, a proprietary aggregate blend has created a grout which exceeds all current performance standards.

EPOXY GROUT SYSTEMS FOR EQUIPMENT BASES
E3-F high flow epoxy grout is the preformance standard for flowable epoxy grouts. A special resin and hardener formulation plus a proprietary aggregate filler allows E3-F to travel through a standard grout box in less than a minute. Designed with excellent engineering properties, this product provides high bearing and ease of placeability.

EUCO #456 MORTAR
EUCO #456 MORTAR is a trowel applied epoxy mortar system designed to surface and resurface floor slabs of all types. Worn and damaged floors can be restored to a uniform, high strength, wear resistant surface with the use of EUCO #456 MORTAR.

EUCO #456S MORTAR
EUCO #456S MORTAR is an epoxy repair material for use where exceptional strength and toughness are needed. It consists of a two component epoxy resin system and a specially processed graded iron aggregate.

EUCO CABLE GROUT
EUCO CABLE GROUT is designed to produce a pumpable, non-shrink, high strength grout. It provides corrosion protection for steel cable, anchorages and rods. EUCO CABLE GROUT is extremely flowable, and cured grout is similar in appearance to concrete.

EUCO CABLE GROUT PTX
EUCO CABLE GROUT PTX is designed to produce a pumpable, non-shrink, high strength grout. It provides corrosion protection for steel cables, anchorages and rods.

EUCO PRE-CAST GROUT
EUCO PRE-CAST GROUT is designed for critical use where high strength, non-staining characteristics and positive expansion are required. It contains only natural aggregate and an expansive cementitious binder.

EUCO RAPID PATCH & RAPID PATCH VF
EUCO RAPID PATCH is a rapid setting, rapid hardening cementitious material for patching and repair of concrete surfaces. Requiring only the addition of water, EUCO RAPID PATCH is easy to use and can be shaved to conform to the area of placement after initial set.

EUCO RAPID PATCH HE
EUCO RAPID PATCH HE is a rapid setting, polymer modified cementitious material for precast, patching and repair of concrete surfaces, and areas requiring rapid set with rapid strength. EUCO RAPID PATCH HE can be used in horizontal, vertical or overhead applications. This product is designed to be placed at 1/16th (2mm) to 1" (25mm) in depth.

EUCO ROCK
EUCO ROCK is a pourable, fast setting hydraulic cement designed for anchoring or grouting applications. EUCO ROCK sets in less than 10 minutes and rapidly achieves load bearing and bond strength properties.

EUCO TREMIE GROUT
EUCO TREMIE GROUT is specially designed for use in underwater grouting applications. This highly flowable, cement based, non-shrink grout remains in a cohesive, well blended mix when placed or pumped in off-shore concrete repairs.

EUCO-SPEED
EUCO-SPEED is a rapid setting, rapid hardening cementitious material for patching and repair of concrete surfaces. Requiring only the addition of water, EUCO-SPEED is easy to use and can be installed with standard tools, equipment and procedures.

EUCO-SPEED MP
EUCO-SPEED MP is a rapid setting, very rapid hardening magnesium phosphate material for patching and repair of concrete and masonry surfaces. EUCO-SPEED MP requires only the addition of water and can be installed with standard tools, equipment and procedures.

EUCOCRETE
EUCOCRETE is a versatile, one part, microsilica modified, patching and repair compound for repair projects of all types. Requiring only the addition of water, EUCOCRETE is a high strength material which is easy to use with an extended working time for ease of placement.

EUCOPATCH
EUCOPATCH is a one part, fast setting, patching and repair material for use on new and existing concrete and masonry surfaces. This product is designed for patching or reconstruction of damaged concrete or masonry; interior or exterior.

EUCOPOXY TUFCOAT DBS TROWEL OVERLAY MORTAR
EUCOPOXY TUFCOAT DBS TROWEL OVERLAY MORTAR is a trowel applied epoxy mortar system designed to resurface floor slabs of all types. Worn and damaged floors can be restored to a uniform, high strength, wear resistant surface with the use of EUCOPOXY TUFCOAT DBS TROWEL OVERLAY MORTAR.

EUCOSHOT
EUCOSHOT is a microsilica modified, one component, concrete repair material. This cement based, modified mortar is designed for use on vertical and overhead surfaces by dry shotcrete (gunite) application.

FLEX-CON
FLEX-CON is a water dispersion of an architectural grade acrylic latex specifically designed for modifying portland cement compositions. Mortar modified with FLEX-CON has improved physical strength, and superior adhesion to old concrete, masonry, brick, and many other surfaces.

HI-FLOW GROUT
HI-FLOW GROUT is specially designed for use where high tolerance, high strength and high fluidity are required. It is formulated as a natural aggregate system with a shrinkage-compensating binder and is highly flowable without sacrificing strength or performance capabilities.

HI-FLOW METALLIC GROUT
HI-FLOW METALLIC GROUT is specially designed for use where high tolerance, high strength and high fluidity are required. It is formulated as a metallic aggregate system with a shrinkage-compensating binder.

NS METALLIC GROUT
NS METALLIC GROUT is a factory-blended, non-shrink grout for use in critical applications. It incorporates the latest technological advances in shrinkage prevention and internal reinforcement. It is virtually non-staining and, therefore, useful in many aesthetic applications.

POLY-PATCH
POLY-PATCH is a normal setting cement based patching and resurfacing compound ready to use with the addition of only water. POLY-PATCH may be used on either vertical or horizontal surfaces, as thin as 1/16" (2 mm).

SBR LATEX
SBR LATEX is a carboxylated styrene butadiene copolymer latex admixture that is designed as an integral adhesive for cement bond coats, mortars and concrete to improve bond strength and chemical resistance.

THIN COAT
THIN COAT is a latex modified cementitious product designed for use as a concrete repair mortar at thicknesses of up to 1/2" (13 mm). It is formulated to incorporate liquid latex technology, which provides excellent durability under freeze/thaw cycling as well as protection against ingress by water and deicing salts.

THIN-TOP SUPREME
THIN-TOP SUPREME is a latex and microsilica modified cementitious mortar designed for use as a floor or deck topping at thicknesses of 1/16" to 3/8" (1.6 mm to 10 mm). This product is a one part formula which incorporates powder latex technology.

VERTICOAT
VERTICOAT is a polymer modified cementitious mortar for vertical and overhead concrete and masonry repairs. It sets rapidly to allow quick, easy repairs of concrete surfaces both inside and outside. VERTICOAT is a two component mortar designed for trowel applied repairs.

VERTICOAT SUPREME
VERTICOAT SUPREME is a one component, microsilica and latex modified, non-sag repair mortar. This cement based product is designed for trowel applied vertical and overhead repairs requiring high performance.